insulation

DIY Doghouse on a Pallet

Posted on Updated on

Hi everyone! Just wanted to show some photos and explain a little about the doghouse I made a while back for our awesome chocolate lab-mix named Gunner.
This was the ghetto-style doghouse we had rigged up before hand. Poor guy! He had to crawl in under the tarp. There’s a dog crate under there, with several blankets inside and an old sleeping bag draped over the top, but still, it’s not very warm or cozy.

I started with a regular pallet. Be sure to choose a sturdy one in good condition. I decided a half-size doghouse was big enough, so I framed that out. If you look closely, you can see I only framed the front and back walls and just added boards to join them together. I added a board under the “floor” of the dog house right at the back edge, in order to make the edge stronger and then I nailed/screwed the frame down. Then I used a staple gun to attach old feed bags (white) and some windbreaker material (black) to the outside of the frame.


The next step was to insulate. I had a huge bag of raw wool, so I fluffed it up and then filled the space in the walls.

I used a piece of fleece and stapled that to the frame and that’s all I have for interior walls. No need for drywall or wood since the wind-proof barrier and wood siding goes on the outside.

I can’t believe how well wool works as insulation! This doghouse is so warm! Search on kijiji or Craigs List or wherever for raw wool and if you can get some, use it!
Next step was to attach siding. I had lots of rough-cut planks, so I cut them to length and screwed them in using deck screws. They are layered like siding should be and overlapped a bit at the corners. In the two photos below, I was still insulating the front section.


Once I finished the front, it was time for the roof. I like a traditional peaked roof, so I made rafters and attached them using long screws. This was trickier than you might think, but worked well. It’s not trivial cutting pieces to be identical, and some of my 2×4’s were a bit twisty… which I didn’t realize until I was trying to make them all work! All the material for the doghouse was just kicking around the farm, I’m pleased to say! Some things, like the huge box of deck screws, were given to us by friends that were moving — thanks Krista!

I also rigged a board across the middle to make the ceiling. The insulation for this part was added later in the form of an old sleeping bag. Next, the roof boards.

I guess there are a few more steps. Roof boards — very tricky to install yourself! — and siding for the gable ends. One of our outdoor kitties had started crawling on top of the dog crate and sleeping there, so I made her an attic room. She snuggles in the sleeping bag that is the insulation! And how did I cut the kitty portal? I didn’t have a jig saw, so I cut two straight cuts and then just hit the wedge shape out using a hammer. And then smoothed it out with a file. Cool, eh? I’m probably related to MacGyver…

I did not overlap the siding boards on the gable ends. That was just too nutty. I just put them up against each other.

Now, how to move it? I held off on mailing on the asphalt shingles because I knew they’d add a lot of weight. I moved the otherwise-complete doghouse all on my own, by manoevering it onto a plastic sleigh/toboggan that we use to haul bales in winter. I used levers, using smaller boards, longer boards, and whatnot, to get it from the shop floor onto the sleigh on the snow. Once I had the doghouse on the sleigh, I just pushed it across the yard from the shop to the house! It was pretty heavy. This is the doghouse in transit:

And here it is in it’s place! See the kitty portal?

Gunner enjoying his new house! He had been pretty reluctant to go in it while it was under construction, but once it was at the house, he knew immediately what do to! What a guy! initially, I stuffed more raw wool into old pillow cases to make cushions, but later I bought a burlap sack to make a mattress for him.
Before we got our second dog, Jenny, I made her a doghouse too! A slightly different design — and I was really under a time crunch on this one!
This is it 90% complete.

All I had left to do was put a couple of boards on each side to close up the roof. You can see I used reflective insulation on this ceiling. I also bought recycled denim insulation instead of using wool in the walls — I just didn’t have time to fluff all that wool up! I highly recommend using a safe insulation like wool or denim, and NOT fibreglass, if you are going to build it this way. You don’t want the fibres bothering your dog, and they might leak out of the walls! You would have to install solid wood or gypsum board walls.
This style of roof is much easier, I have to say. I just screwed two taller boards to the front wall, and then decided on the roof size and cut it out. I shingled it before installing it, except the last shingles which would cover the screws that attach to the taller boards. I also bent a couple of shingles over the front edge on a warm day and nailed them on. Darren and our friends Michelle and James helped me move this one! Thanks guys!
Anyways, I just wanted to share what I made. It’s not exactly step-by-step, but if you’re reasonably handy, I think you can figure most of it out by looking at the pictures. If you have any questions, leave a comment!
Take care everybody! Go give your dog (or kitty) some love! 🙂
Other woodworking projects