I should probably apologize right now, as this is going to be another of those oddly-specific posts that you are going to either get VERY excited about, because it’s exactly what you need, or it’s not relevant to your life at all. This post is about making coats for alpacas! 🙂
These coats lay across the animal’s back and attach under the belly with a strap and fasten across the front of their chest with overlapping panels and either straps or velcro. Let’s start with the basic shape. I found this pattern image online and used it as a guideline. I would love to give credit to the originator, but all I have is this google drive link.
The U-shaped part at the top is where the alpaca’s neck will go, and the chest straps will connect across the alpaca’s chest and the belly straps will connect under the belly. You will need 2 measurements for the alpaca you are making the coat for: around-the-belly circumference and length of back (from neck to tail).
My first venture into making coats was last fall, when we knew we had a baby on the way and it would be due in October. What a heck of a time of year to be born! So I made two coats — a lightweight one and a warmer one. I used measurements off the internet for the sizes of coats that were for sale. I was so glad I did. That little guy really needed his coat! He was basically born shivering and after I dried him off, I put it on him and he perked up a lot!
The next day, I made him a neckwarmer and put that on him too.
As he got bigger and winter got colder, we put his thicker coat on him. This one was insulated with alpaca fibre from his mama!
Isn’t he adorable!?! He grew up really well and is still very gentle and likes to come nose-to-nose with me. I think he knows we will take care of him no matter what!
Okay, we are in danger of getting sentimental, so let’s get down to business and look at how I made these coats! 🙂
I felt pretty good about how that went! We used the light blue coat for Rupert for a few days when he was born this summer too!
If you just can’t get enough of these little ones, check out my posts here.
One cold evening last year, I noticed our elderly female, Uki, shivering. I felt so bad for her! She was still nursing little Pigpen and earlier in the year, she had been putting a lot of energy into growing him and not her coat.
So, I quickly made up a three-layer coat to help her keep warm. This year, with more time to work on it, I made some alpaca fibre into batts and added a quilted layer! I used the existing coat as a pattern and cut out the cloth from an old but very soft sheet.
Using full-size batts was far better than hand-carded fibre, and I only anchored it every 3-4 inches.
I machine quilted the section at the chest, so that it isn’t quite as puffy. I figured out how to do it without the cloth puckering (thank you, internet). I then stitched it to the windproof layer in ten or so places. We put it on her tonight, even though it isn’t forecast to be too cold. She is pregnant again, with her cria due in June, so I think she might just wear this coat all winter!
Last year, the coat was a bit too loose and would sometimes creep forward and end up bunched up around her neck. Hopefully now that it’s a puffy coat, it will stay put better. I did it up as tightly as I could.
I should make another one in case Daisy needs it! She is still nursing little Rupert, but at least she is not pregnant too. What a toll that must take on a body!
Now I have friends asking if I can make coats for dogs! I’m not sure I want to get into that racket… but then I hate to see an animal cold! 🙂
Take care, everybody! Stay warm!