Does anyone else here like to play the board game Aggravation? It’s a game where you have to move your marbles around the board to get from “home” to “safe.” Along the way, you can take shortcuts, or take out your friends and send them back to the beginning. It looks like this:
I love this game! It’s so fun. So, when I saw a crappy old one for $1 at a garage sale, I bought it. But it didn’t have enough holes drilled in it. It only had holes around the outside (see photo below). That isn’t very fun! You need a center hole to be a short cut, and some way to get into the middle. So, I decided to add more holes!
I tried to make the curves smooth, and by putting masking tape on, I could erase them and adjust them before drilling them.
Initially, I used a drill stand which holds the hand drill at whatever angle you set. I set it for 90 degrees, or perpendicular. It worked alright, but on a couple of the holes, the device moved a little and the hole did not end up where I had wanted it. Then, we found a drill press on kijiji! So, I set the depth and that was better… for the holes it could reach. It couldn’t reach the holes closes to the centre, or the curved parts. So in the end, I used a combination of the hand-held drill and stand and the drill press. I think I may have drilled the center hole a bit too deep! Once I had all the holes drilled, I took the masking tape off.
Now, I had to do something about that rather awful finish. There were some pretty big gouges too, where the wood had broken away when the original maker drilled their holes. I filled those with wood filler and then went at it with the sander! The wood filler shows up as light grey in the photo below. Isn’t that a nice piece of wood, though!?! Without that orange stain?!?
I had to redrill one hole because the stand had slipped and the hole was too close to its neighbour. I put down lots of wood filler, then very carefully drilled into all that wood filler to move the hole over. It worked! in the photo above, the new hole is pretty close to 12 o’clock.
Next, I slowly and carefully painted all the holes with dark brown enamel that I’ve had around here for ages. Looks nice, doesn’t it!?! Sure beats that orange-brown wood! You can see old holes, new holes and painted holes below.
The new holes needed 2 coats because some enamel absorbed into the wood. Then, I had to decide what to do for the colours. Did you notice this game is a hexagon? There are home bases for 6 people to play. I thought about getting marbles in 6 colours and painting the home bases and safe bases in those colours, but then I remembered I had some large wooden beads… I used the beads and went through my craft supplies at home to find 6 different colours of enamel/paint that I already had! (Yes, some of it was nail polish! I also borrowed some yellow from my mom… Thanks, Mom!)
I am so pleased with the result!
I did kind of a minimalist painting scheme on the home bases, just connecting the holes with lines. Overall, this was a really fun project, and it would be equally fun to make from scratch! I’ve seen aggravation games with 4 home bases or 8, but 6 was good too.
How To Play
Your marbles (or in this case, beads) start at your home, which is on the outside edge of the board. My family plays by rolling a dice, but some people play with cards — that lets you plan your moves. You need to roll a 1 or a 6 to get out of the home base and start playing — that just gets your marble onto that first hole outside your home base. Then, you move around clockwise according to how you roll until you get back to your safe — the part inside the curved areas on my board. In the photo above, you can see there are 2 orange marbles still at home and 2 out and about on the playing board. The copper-coloured player has one in his safe already and one in the shortcut… he or she is probably waiting for a 1 to get out! 🙂 As you go around, if you land on someone else’s marble you get to send them home. You can have all your marbles in play at one time, or just focus on one.
If you want to try your luck on the shortcut, you have to jump into the middle from a special dot. On my game, it is painted sparkly! On other games, it might be painted red or with a yellow circle around it. Can you see the sparkly holes at the top of each arc? You need to roll a 1 to get out, and you can come out onto any sparkly dot you choose… but you’ll probably want the one just before your safe base!
The first person to get all their marbles into their safe wins! At the end, sometimes I get stuck waiting for a small number like a 2 so I can get in the door! 🙂
I hope this inspires you to get a piece of plywood (at least a half inch thick) and start drilling some holes! 🙂 Take care, everybody.
More refurbishing: An Old Drum Carder