Refurbishing my old Drum Carder

Posted on Updated on

Hi everyone! As you know, I raise alpacas and I have been wanting to make my own yarn from their glorious fibre! To help with that, my grandma gave me her good spinning wheel and her drum carder. I learned to spin this summer with the help of an instructor from the weaver’s guild — God bless you, Brenda!! — but this post isn’t about spinning. It’s about the drum carder.

I have made quite a few batts with it, but I was starting to notice a lot of the teeth coming out — 3 or 4 for every batt I made with it! I was starting to really worry!

Don’t you love how the cloth is actually thick leather and the teeth look like blunt thumbtacks pushed through from the back? I wonder what year this drum carder was made? If you have any idea, leave a comment because I would love to know!

When I looked into ordering a new carding cloth — that’s what they call that spiky material that goes on the outside of the drum — I couldn’t seem to find a Canadian source for it. Since the US postal system is quite broken, I was not keen on ordering from south of the border and I prefer to buy local or at least Canadian when I can. I asked my aunt-in-law who owns Legacy Studio if she had carding cloth, or if she could get it for me. She said the best stuff comes from Europe, so I found a supplier from the Netherlands, Golden Fleece Carders. Want to hear the best part? I got my carding cloth — which is the perfect width for my machine! — in 17 days! From overseas!! I am so thrilled! I ordered something from the US in July and it took over 6 weeks!

So, anyways, I am really excited to be refurbishing the old drum carder. It’s like Reduce, Reuse, Recycle got another R: Refurbish! So, let the not-quite-tutorial begin!

I took the old cloth off using a flathead screwdriver to pry the staples and nails off.

There are so many teeth missing! Especially along that one edge. The batts always looked like they’d been to hell and back. So many holes.

So, I continued prying staples and nails until I had them all off! Avert your eyes — that’s a naked drum there! 😮

Check out the new cloth! There are quite a few more pins per square inch…

I was so thrilled that this company carried the carding cloth in the exact width I needed. The American ones were never the right width (I don’t mean to sound anti-American, it’s just true). This cloth is only 72 DPI, because I wanted it to be multi-purpose. For alpaca, some people go A LOT finer!

I measured how long it needed to be and started taking out pins so I could cut it. I took out 3 rows in total and they came out easily. Then I cut it with regular scissors!

Now here is where things start getting interesting! See how close together those two drums are? The top one, with the old pins, is called the licker and its pins are NOT supposed to touch the main drum, or maybe just barely touch. Because the pins on the new cloth are quite a bit longer, the pins on the two drums are grinding together at this point! (The old pins touched more than they should have, but I didn’t know better.) So, I had to figure out if I could move either of the drums. It turns out, my little old drum carder is pretty adjustable! I was able to loosen the bolts on the sides (you can see one on the left) and back the main drum up so that it would have more room! It was a bit of work, but I’m happy — the teeth barely touch now.

I then got to work stapling and nailing the new cloth in place. I forgot to get a picture of the stapling, but I just used an ordinary staple gun. Then, I had to nail the little nails back in where the cloth meets up. See the problem below?

You can’t nail them in because you’ll end up pounding on the pins of the carding cloth! Luckily, we had a punch, which worked great! I just carefully positioned it on the head of each nail and pounded them in.

Sorry, you can’t see the top, but it’s just flat for the hammer to hit it. This let me hammer those little nails right down snuggly!

And now my drum carder is like new, sort of!

For now, I’ve decided to leave the licker drum as is. I might change the cloth in the future, but it’s working okay, so I left it!

I have to tell you: I LOVE giving new life to old things! It is one of my favourite things to do, and probably why this project was so much fun! (If you feel the same, I recommend Laura Kampf videos on YouTube because she is the best at this, and her videography is a pleasure to watch!)

Of course I had to put the new/old carder to work! Since the new teeth are longer, it makes thicker batts. They still look a bit ratty; they don’t come off the drum as easily because there are so many more teeth! I also might need to work on my technique…

I made 2 batts and then took the next one off as a rolag, which seemed to work better. Dang, it’s a dense rolag though!

I should probably apologize to my regular readers, as this is one of those oddly-specific posts and if you don’t know what a rolag is, I don’t blame you! A rolag is a small roll of fibre that spinners can spin from. Anyways, thanks for hanging in there with me all this while and I hope it might help someone else who needs to change carding cloth on their old drum carder!

Reduce, Reuse, Recycle, Refurbish, Repair, Repurpose! So many great Re’s! If you have any examples of Refubish, Repair or Repurpose, share them in the comments! 🙂

4 thoughts on “Refurbishing my old Drum Carder

    Barbara Szijarto said:
    October 30, 2020 at 6:55 am

    Good job Teresa. I too need to refurbish my antique drum carder can you please send me the info on the Netherlands supplier. Barbara

    Barbara Szijarto said:
    October 30, 2020 at 8:14 am

    Good work Teresa. I too want to buy some new carding cloth. Please send me the contact info so I can order some from the Netherlands.

    I found the maker of my antique carder had embossed his name on the piece of wood under the metal feed tray. It was made right here in Edmonton!

    I washed the batts (in net bags) I created from the shorts you gave me and dryed them in the new hanging dryer. First I hung it outdoors in the sun, then brought it indoors for the night. The wool dryed completely by the next morning. I love that it’s so portable and takes little space. Thank you for letting me view yours!

    I did fluff up the batts so they will need to be run through the carder again; but that’s such a rewarding meditative process!

    I now have white (Boeing) a little more red/brown and a dark brown/black to felt with.

    Blessings, Barbara

    On Fri., Oct. 30, 2020, 12:29 a.m. Adventures with Teresa, wrote:

    > Teresa posted: ” Hi everyone! As you know, I raise alpacas and I have been > wanting to make my own yarn from their glorious fibre! To help with that, > my grandma gave me her good spinning wheel and her drum carder. I learned > to spin this summer with the help of an instruct” >

      Teresa responded:
      November 1, 2020 at 5:27 pm

      Hi Barbara! It was Golden Fleece Carders, and their website is here: https://www.gfcarders.com/
      I also updated the post to include the website!

    […] More refurbishing: An Old Drum Carder […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.